Series 7 by Details

-desks

Series 7 Standing Desk is one of the premier height adjustable desks from the Details division of Steelcase. Steelcase is one of the leading contract furniture manufacturers and have placed this desk into a number of large corporate accounts, such as Chevron and Intel.

Cost and Availability:
Starting at $1,439.00

This desk is a very sturdy desk which offers some of the following functionality:
Performance & Specifications:
• 24-1/4” to 52” electric height adjustability range
• Travel speed is 1.7” per second
• 360 lbs. (2-leg) to 540 lbs. (3-leg) distributed load bearing capacity per table (including worksurface)
• Lifting columns controlled by central control box to ensure synchronization
• Soft stop motor eliminates abrupt starts and stops
• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. May draw 5 amps maximum under full load, idle current is typically 20mA.
• All assemblies meet or exceed ANSI/BIFMA standards
• More than just a worksurface; add the rightworktools and it becomes a fully adjustable workstation

Adjustment:
• 3-stage synchronized lifting columns with integral shrouding
• Height adjustability options include: up/down activation buttons, three programmable pre-sets (default) and three programmable pre-sets with digital display
• Infinite height adjustment within the range
• 2.5” diameter glides have 25/32” of height adjustment for surface leveling on uneven floors Worksurface Construction:
• Core is 45 pound particle board
• Surface is High Pressure Laminate
• Available in the Steelcase Universal Table and Urethane Profile styles
• Universal style edge finish is specified separately from laminate color
• Urethane profile style is edge banded on the back and side to match the urethane finish on the
front (user’s) edge.
• Reinforced where necessary with steel bars
• Available in Rectangular, 90° and 120° Corner configurations
• Available in 23” and 29” depths in Rectangular; 23” only in 90° and 120°
• Maximum standard table size is 140 linear inches (based on a 90° 70” x 70” x 23” table)
• Worksurfaces have pre-drilled mounting holes for the base
• Worksurfaces can have an optional keyboard support mounted
• Worksurfaces have a 1”gap between rear and panel face for clearance and cable access
• Wire management is available
• All standard Steelcase laminates supported (see Details SpecGuide for a full list)
• Open line laminates are available
• Universal worksurfaces are SCS Indoor Advantage™ certified for indoor air quality

Pro’s:
– Very sturdy design
– Fast travel speed
– 24.75″ to 52″ distance is ideal for large installations (meets standards for most people 5’3″ to 6’7″ tall)

Cons’s:
– PRICE! Very Expensive. There are a number of desk bases comparable that almost 1/2 the cost.

Available at the following locations:
Online – http://www.steelcase.com/en/shop/shop-online/pages/main.aspx
Retail – http://www.steelcase.com/en/shop/shop-retail/pages/main.aspx

Leave a Reply

Your email address will not be published. Required fields are marked *